Technical Information

DecoSplash Sizes & Dimensions

DecoSplash® is available in a range of standard sizes. Cutting services are available to cut your splashback to your desired size. Two sheets can also be joined for greater height or length and images can be formatted to suit.

650 Series

600mm x 1800mm

600mm x 2400mm

600mm x 3000mm

600mm x 3600mm

750 Series

750mm x 1800mm

750mm x 2400mm

750mm x 3000mm

750mm x 3600mm

1200 Series

1200mm x 2400mm

200mm x 3000mm

1500 Series

1500mm x 3000mm

1500mm x 3600mm

Installation Methods

DecoSplash® can be installed directly onto most wall surfaces including gyprock, tiles, bricks or over existing splashbacks. Installation utilises double sided tape and silicon to secure the splashback into place.

Cutting DecoSplash®

DecoSplash® can be delivered cut-to-size, however your splashback can be cut on site to allow for any last-minute adjustments. A circular saw with an aluminium blade is ideal for long cuts and a jig saw with a metal cutting blade is recommended for detailed cut-outs for power points and taps.

*Please Note: our cutting service is for external straight edges only. We do not offer cut-outs for power points, curved edges or section cut-outs. You are best to manage these cuts on site to ensure an accurate fit. Please download the installation guide or contact us for full details.

Standards & Compliance

DecoSplash® fully complies with all of the relevant Australian and International Standards for Splashbacks.

Australian Construction Code (BCA) or NCC

The BCA sets out the requirements for non-combustible materials that are used in building construction. DecoSplash has been tested at the CSIRO Building Research Station to AS 1530.3 and AS1530.1, and complies with BCA requirements as a “non-combustible” material.

Gas Regulations

DecoSplash fully complies with the requirements of AS5601.1 (the Australian Standard for the installation of gas appliances) as a Fire Resistant Material. However it is recommended that gas cook tops are installed with a minimum distance of 200mm from the splashback to the back gas hob.

DecoSplash® can also be installed behind an electric cooktop. A minimum distance of 100mm from the splashback is recommended.

Power Points

Power Points sold in Australia by major Australian suppliers are designed for installation with metal in accordance with the Electrical Standard AS3000.

Power Points are designed to be electrically isolated from the metal surface, however as an additional safety measure, an earth wire can be fitted to the splashback. The fitting of the optional earth wire is recommended.

NOTE: power point installation MUST be carried out by a licensed electrical contractor in all circumstances.

Power Point Installation – Front View

Power Point installation showing recommended earth wire.

Powder Coated Surface Standards

Qualicoat is the international standard for quality assurance in powder coating.

The powder coat finish used for DecoSplash® is applied by a licensed Qualicoat applicator and complies with Class 2 “Super Durable” requirements. DecoSplash® also fully complies with the requirements of the Australian Standard for powder coating, AS3715.

DecoSplash® features a Polyurethane powder coat finish which means it is ‘anti-graffiti’ grade. DecoSplash® splashbacks will repel anything trying to stick to it. In a kitchen environment, this makes DecoSplash® very easy to clean with minimal maintenance. Simply wipe clean by using a damp cloth. For more information, please see our cleaning guide.

DecoSplash Warranty

DecoSplash® is warranted for a period of 10 years that the coating will not chip, peel or flake and is subject to the below conditions:

  1. Regular cleaning is conducted in accordance with our product care guide and cleaning product recommendations
  2. Damage and abuse of the product is excluded from warranty cover

 For more information, please visit our Terms and Conditions page here.